1" Rope Gasket Kit – 10 ft | Includes High-Temp Adhesive | Graphite-Coated Fiberglass Stove Door Seal

1" Rope Gasket Kit – 10 ft | Includes High-Temp Adhesive | Graphite-Coated Fiberglass Stove Door Seal

Restore an airtight seal and improve heating efficiency with this 1-inch rope gasket kit. Made from high-temperature fiberglass and graphite-impregnated to reduce sticking and creosote buildup, this gasket is designed for demanding stove and fireplace applications. The kit includes 10 feet of gasket and a 2 oz bottle of high-temp adhesive for a complete, ready-to-install solution.

Key Features:
• Durable Graphite-Coated Fiberglass – Withstands high heat and repeated door cycling
• Airtight Seal – Improves combustion efficiency and heat retention
• Reduced Sticking – Graphite coating helps prevent gasket adhesion to metal surfaces
• Flexible & Easy to Fit – Trims cleanly and conforms to door channels
• Complete Kit – Includes gasket and adhesive for one-step installation

Specifications:
• Gasket Material: High-temperature fiberglass with graphite coating
• Gasket Size: 1" wide x 1" thick
• Length: 10 feet
• Adhesive Included: 2 oz high-temperature gasket cement
• Color: White

Common Applications:
• Wood stove doors
• Fireplace inserts
• Wood and coal furnaces
• Other high-heat sealing applications requiring a 1" gasket

Why Replace Your Stove Gasket?
A worn or flattened gasket allows excess air into the firebox, reducing efficiency, causing uneven burns, and making temperature control difficult. Replacing it with a properly sized 1-inch rope gasket restores the airtight seal your stove was designed to have.

Installation Instructions:
1) Allow the stove to cool completely before servicing.
2) Open the stove door and remove the old gasket by pulling it out of the channel.
3) Scrape away old adhesive using a wire brush or flat scraper, then clean the channel thoroughly.
4) Apply a thin, even bead of the included high-temp adhesive inside the gasket channel.
5) Press the new 1" rope gasket firmly into the channel, working evenly around the door. Do not stretch the gasket.
6) Trim excess gasket so the ends meet snugly without overlapping.
7) Close the stove door gently and allow the adhesive to cure according to adhesive instructions (typically several hours).
8) After curing, build a small fire to fully set the gasket.

Installation Tip:
Do not overfill the channel with adhesive—too much cement can prevent the gasket from seating properly. Always confirm gasket size with your stove manufacturer’s manual before installation.

Achieve a tighter seal, better efficiency, and safer operation with this 1" Rope Gasket Kit (10 ft with adhesive)—a dependable solution for stove and fireplace maintenance.